Online Store

µFR Nano (TTL) pinout #

Connection diagrams #

Direct connection #

Logic level voltage is 3.3V.

The connection diagram is shown in the picture.

ttl-232-ufr-1

Connection via RS232 to TTL converter #

RX input pin on the device is connected to pin 3 on DB9 RS232 connector via the converter.

TX output pin on the device is connected to pin 2 on the DB9 RS232 connector via the converter.

The reset input pin on the device is connected to pin 7 (RTS) on the DB9 RS232 connector via the converter.

A schematic diagram of the converter is shown in the picture.

ttl-232-ufr-schema

Connection via FTDI TTL-232R-3V3 cable #

Use this cable with factory settings.

The connection diagram is shown in the picture.

ttl-232-ufr-2

Scroll Up