Online Store

µFR Nano Online Default Settings

In the table below are shown default settings for µFR Nano Online.

Parameter Value
Access point IP address 192.168.4.1
Server protocol UDP
Port 1 8881
Port 2 8882
UART1 baud rate 115200
UART2 baud rate 115200
RS485 support Disabled
Transparent mode Enabled
Transparent device 1
Master/Slave mode Slave
AP SSID µFR Nano Online Serial number (ONxxxxxx)
AP password None
Login username µFR
Login password µFR
Discovery server port 8880
Master mode POST request Enabled
Master mode UDP broadcast Enabled
Master mode UDP broadcast address Local broadcast address (eg. X.X.X.255)
Master mode linear read Disabled
Default Bluetooth Low Energy mode PIN 123456