DL533N XL - LibNFC NFC Reader

Extra-large LibNFC Smart Card NFC Reader

DL533N CS is an extra-large NFC RFID device for NFC RFID cards and tags reading and writing as well as NFC P2P communication.

It’s been developed on the basis of the NXP PN533 chip, following the manufacturers’ recommendations and guidelines. NXP PN533 supports the full range of the NFC Forum specifications and standards.

This RFID product is fully supported by the open-source library LibNFC. Therefore, it is a good starting point for NFC application development projects on various platforms.

Due to the large built-in RF antenna, the range of its reading range has been expanded. Accordingly, the device can read RFID cards at a distance of up to 180 mm (7.99″).

Using LibNFC libraries and examples are well explained at the LibNFC community and forums.

LibNFC is an open-source project with a large community that is in constant development. OEM card size reader corresponds to the IP54 standard and it is dust and water splash resistant.

Docs & Software Download

 

DL533N NFC RFID READER WRITER COMMON IMPLEMENTATION

  • Read NFC RFID -Tags: Reads the content of the NFC RFID tags (most of MIFARE® cards, FeliCa, Topaz, etc)
  • Write NFC RFID -Tags: Writes various data content onto the NFC RFID tags (URLs, SMS, Phone No, vCards, MIME types, etc).
  • Card emulation: Emulates NFC tags Type 2 and Type 4, readable by other NFC-devices.
  • P2P communication: Active NFC-based P2P communication for data transfer between NFC supported devices.

SOFTWARE

This RFID device is delivered without any binary driver.

With LibUSB and LibNFC, you can compile the drivers for Windows, Mac OS X, and Linux operating systems. The compiled driver allows the developer to explore the LibNFC C API and project the custom software development.
Windows system supports the implementation with an official NXP Drivers for the PN533 based products.

NOTICE: The device does not support the µFR Series Software SDK.

HIGHLIGHTS

Supports:

  • ISO/IEC 14443A/MIFARE®
  • ISO/IEC 14443B.
  • MIFARE Classic® 1 KB or MIFARE Classic® 4 KB emulation encryption in RFID Reader Writer mode, and MIFARE® higher transfer speed communication at 212 kbit/s, 424 kbit/s, and 828 kbit/s
  • FeliCa protocol contactless communication at 212 kbit/s, 424 kbit/s, and 828 kbit/s
  • NFC P2P communication

Other features:

  • Large community (LibNFC) support
  • Reader dimensions (178 x 178 x 5 mm), convenient for demanding systems integration
  • Available without the IP54 enclosure (OEM)
  • Beeper and LEDs are available on request
DL533N CS hardware features
FeatureDescription   
Operating frequency 13.56 MHz   
Read rangeOperating distance is 0-180mm (0”-7.09”), depending on the antenna geometry and reader configuration   
Read/Write speed212 kbit/s, 424 kbit/s , 848 kbit/s   
Supply current 150-300 mA (operating)
Supply voltage 5V   
Supported cards and tags

MIFARE® family: MIFARE Mini®, MIFARE Classic® (1K, 4K, EV1), MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE PLUS® (2K, 4K), MIFARE DESFire® (Light, 2K, 4K, 8K, EV1, EV2)

NTAG® family: NXP NTAG® 2xx Type 2 (210, 213, 215, 216 Tag Tamper), NXP NTAG® 4xx DNA Type 4 (413, 424)

FeliCa, Smart eID, ICAO, EMVCo 2.1, picoPass, Jewel/Topaz, etc.

   
Connection and power supply USB port, RS232, UART (TTL)   
CommunicationNFC P2P communication   
Software

Example source code script for DL533N NFC Reader basic testing with implemented GPIO pins for LEDs control and buzzer specific

   
Supported Operating SystemsMicrosoft® Windows™, Linux®, macOS, Android   
Smart Card Interface ISO14443 Type A & B   
Related equipment USB cable, Free software download   
Certification CE, RoHS   
Size & Weight
Device versionSize (mm)Device weightCommercial set weight
DL533N XL178 x 178 x 5 104 g156 g
DL533N CS86 x 54 x 9 41 g126 g
DL533N CS OEM84 x 50 x 5 17 g103 g
DL533N CS IP496 x 64 x 1170 g140 g
   
AccessoriesCards, key-fobs, labels, wristbands, tags   

WARRANTY: 24 MONTHS

DL533N CS hardware features
FeatureDescription   
Operating frequency 13.56 MHz   
Read rangeOperating distance is 0-180mm (0”-7.09”), depending on the antenna geometry and reader configuration   
Read/Write speed212 kbit/s, 424 kbit/s , 848 kbit/s   
Supply current 150-300 mA (operating)
Supply voltage 5V   
Supported cards and tags

MIFARE® family: MIFARE Mini®, MIFARE Classic® (1K, 4K, EV1), MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE PLUS® (2K, 4K), MIFARE DESFire® (Light, 2K, 4K, 8K, EV1, EV2)

NTAG® family: NXP NTAG® 2xx Type 2 (210, 213, 215, 216 Tag Tamper), NXP NTAG® 4xx DNA Type 4 (413, 424)

FeliCa, Smart eID, ICAO, EMVCo 2.1, picoPass, Jewel/Topaz, etc.

   
Connection and power supply USB port, RS232, UART (TTL)   
CommunicationNFC P2P communication   
Software

Example source code script for DL533N NFC Reader basic testing with implemented GPIO pins for LEDs control and buzzer specific

   
Supported Operating SystemsMicrosoft® Windows™, Linux®, macOS, Android   
Smart Card Interface ISO14443 Type A & B   
Related equipment USB cable, Free software download   
Certification CE, RoHS   
AccessoriesCards, key-fobs, labels, wristbands, tags   
Size & Weight 
ModelDimensions (mm)DeviceCommercial Set
DL533N XL178 x 178 x 5104 g156 g
DL533N CS86 x 54 x 9 41 g126 g
DL533N CS OEM84 x 50 x 517 g103 g
DL533N CS IP496 x 64 x 11 70 g140 g

WARRANTY: 24 MONTHS