Public
Authored by sladjan

Welcome to our Gitlab software repository

Getting started


Welcome to our Gitlab software repository.
This page serves to guide you through initial device setup and to simplify navigation through our software repository.
Below, you will find setup instructions for your devices as well as software SDK examples categorized by different factors such as device type, programming language, platform, card types, software features, etc.

IMPORTANT
If you already know your way around our software repository you can access it via direct software repository link.


Initial setup - installation instruction

Pick your device from the list to jump to setup section.

NFC Readers


µFR Series (Nano, Classic CS, Classic, Advance, XL)

Step 1 - Install the appropriate drivers for your operating system. µFR Series NFC Readers use FTDI chip for USB communication. Link from the table below will take you to FTDI chip driver download page.
Step 2 - Install the latest firmware version (optional). We release frequent firmware updates which add new features to the µFR device. Use the link from the table below to upgrade your device.
Step 3 - Download software examples with SDK. The table below links to software categories.
Step 4 - For software development refer to our API Documentation. Download link in the table below.

Device Drivers Firmware Software Libraries Documentation
µFR Series Link Link Link Link Link


µFR Online Series (Nano Online)

Setup via cable

Step 1 - Install the appropriate drivers for your operating system. µFR Series NFC Readers use FTDI chip for USB communication. Link from the table below will take you to FTDI chip driver download page.
Step 2 - Install the latest firmware version (optional). We release frequent firmware updates which add new features to the µFR device. Use the link from the table below to upgrade your device.
Step 3 - Download software examples with SDK. The table below links to software categories.
Step 4 - For software development refer to our API Documentation. Download link in the table below.

Setup via network

Step 1 - Power on a device

  • Connect the device to a 5V DC power source.
  • Wait for a few moments to device boot in Access Point mode (see LED status table below).

Step 2 - Connect to the uFR Online

  • Scan for networks using your WiFi enable device (computer, smartphone etc.).
  • Connect to device named ONxxxxxx.
  • Wait for the connection to be made successfully.
  • Open your favorite web browser and navigate to http://192.168.4.1

Step 3 - Set up your device

  • After web page is loaded successfully log in using default credentials (user: ufr - pass: ufr).
  • Wait for a few moments to device scan for an available WiFi networks.
  • Select a WiFi network and click connect button.
  • Enter password for wireless network if needed and wait to connect successfully.

Step 4 - Finish setting up your device

  • Click on uFR Online button on top left corner to find out your new IP address.
  • Reboot your uFR Online reader.

For additional configuration options refer to µFR Online - Quick Start Guide.pdf document.

We also recommend referring to uFR Online - Relevant download links.pdf document for a collection of important document and software links.

Device Drivers Firmware Software SDK Software tool Libraries Documentation
µFR Online Series Link Link Link Link Link Link


Base HD

Step 1 - Install the appropriate drivers for your operating system. USB to RS485 converter uses FTDI chip for USB communication. Link from the table below will take you to FTDI chip driver download page.
Step 2 - Install the latest firmware version (optional). We release frequent firmware updates which add new features to the µFR device. Use the link from the table below to upgrade your device.
Step 3 - Download software examples with SDK. The table below links to software categories.
Step 4 - For software development refer to our API Documentation. Download link in the table below.

Device Drivers Firmware Software Libraries Documentation
Base HD Link Link Link Link Link


DL533N (DL533N USB Dongle, DL533N CS, DL533N XL)

Coming soon...

Device Drivers Software Libraries Documentation
DL533N Link Link Link Link


DL533R (DL533R USB Dongle, DL533R CS, DL533R XL)

Coming soon...

Device Drivers Firmware Software Libraries Documentation
DL533R Link Link Link Link Link


Software SDK categories

This section redirects to software repositories corresponding to the selected tag bellow.

Programming languages

Platform

Software category

Software tools

µFR Reader tool - Reads device configuration and restores factory settings.
NDEF software and tag emulation - Write NDEF messages in NFC tags (URL, SMS, Phone, WiFi, Bluetooth...) and store NDEF messages inside the NFC reader for NFC tag emulation (NFC Reader becomes NFC tag).
Keyboard emulation - Reads NFC cards/tags and types card information (Serial number and card content) into selected text field, excel file, etc. Also has HTTP function for sending card information online.
MIFARE programming tool - MIFARE card manipulation. Bulk card programming.
Fast Card Read - Lightweight software for reading NFC cards.
Async UID sending - Configuration of asynchronous mode on µFR Readers.
RF Settings manipulation - Manually set RF parameters for µFR Series devices.

Edited
18 Bytes
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment